Scania VCI3 WIFI SDP3 2.5.x 2022 Truck Diagnostic system + Programming + Xcom 2.30 + SOPS

Scania VCI3 WIFI SDP3 2.5.x 2022 Truck Diagnostic system + Programming + Xcom 2.30 + SOPS

Scania VCI3 SDP3 Truck Diagnostic tool latest version V2.5x 2022 with laptop & cables with full programming 

Laptop
Dell latitude
Panasonic CF-19
Panasonic CF-53
none
Accessory
Aluminium Case
none

Normaler Preis
€799,99
Sonderpreis
€799,99
Normaler Preis
Ausverkauft
Einzelpreis
pro 
Add to Wishlist
  • VCI SDP3 Description:

    VCI3 for Scania is a tool that is used together with Scania Diagnosis and Programmer 3 (SDP3) software to diagnose and troubleshoot for Scania heavy vehicles and trucks.

    VCI Feature:

     Stored fault codes, proposals for remedial action and delete option.

    Control unit configuration and settings.
    Information about electrical components and their location.
    Input and output signals.
    Activation of components.
    Spare part programming.
    Circuit diagrams. For each circuit there is a diagram which clearly shows how the particular circuit is implemented in the respective vehicle.
    Chassis data. The vehicle gives the program a description of itself and how it is configured.
    User functions. In order to meet service market requirements to work more effectively, there is an option to troubleshoot via user functions, e.g. cruise control.
    Use of the program requires a PC, a USB key and a VCI3. These components must comply with the applicable system requirements, so that the program will operate correctly.


    SCANIA DEVELOPER Software (XCOM-SOPS-Scania SDP3-BNS II)
     
    Buy it for 5 reasons:
    1. Read ECU ID, data, parameters, fingerprint.
    2. Read and erase DTC.
    3. Spare Part program all systems.
    4. Gather all data for field-test functions.
    5. Load, modify, compare SOPS files.
     
    Supported modification of ECU data of the following types:
    • EMS – Engine management system.
    • GMS – Gearbox management system.
    • RET – Retarder system.
    • AWD – All wheel drive system.
    • CLS – Clutch Control.
    • EEC – Exhaust Emission Control.
    • COO (COO7) – Coordinator.
    • BWS (BCI1) – Bodywork system.
     
    Supported resolving trouble codes to text description for the following types:
    • EMS (S6, S7, S8).
    • GMS (OPC4, OPC5).
    • RET (RET1, RET2).
    • AWD (AWD1).
    • EEC (SCR1, EEC3).
    • COO (COO6, COO7).
    • HMS (HMS1).
     
    Some interesting options with XCOM:
    • AdBlue ON/OFF.
    • EGR ON/OFF.
    • Chassis ID/VIN Change.
    • Immobilizer ON/OFF.
    • Truck Power INCREASE.
    • ECU Recovery.
    • ECU Reset.
    • ECU Unlock without PIN.
     
    Support Languages: English, German, Spanish, French, Japanese, Dutch, Polish, Portuguese, Swedish, Norwegian, Suomi, Turkish, Italian, Czech, Russian.

    This is ready to use. It is installed on to a Windows 10 genuine laptop, and all Scania software version 2.5.x 2022 + XCOM 2.30 is installed and ready to use with all of the cables provided. 

  • You can choose between 3 laptops when making your purchase. All laptops are GRADE A refurbished with a 12 month warranty. 

    Dell Latitude - We use dell E series laptops with SSD hard drives and at least core i5 CPU's so that they are reliable and fast. 

    Panasonic CF-53 - We use at least mark 2 CF-53's with SSD hard drives and at least core i5 CPU's so that they are reliable and fast. 

    Panasonic CF-19 - We use at least mark 6 CF-19's with SSD hard drives and at least core i5 CPU's so that they are reliable and fast. 

    If you require a specific specification, do not hesitate to contact us. 

    • Laptop
    • Scania VCI3
    • Latest software installed ready to use.

     
    This system is pre-built, the software is pre-configured and installed, and the system is ready to use upon receipt! Simply start working straight away!

     

Product Details

VCI SDP3 Description:

VCI3 for Scania is a tool that is used together with Scania Diagnosis and Programmer 3 (SDP3) software to diagnose and troubleshoot for Scania heavy vehicles and trucks.

VCI Feature:

 Stored fault codes, proposals for remedial action and delete option.

Control unit configuration and settings.
Information about electrical components and their location.
Input and output signals.
Activation of components.
Spare part programming.
Circuit diagrams. For each circuit there is a diagram which clearly shows how the particular circuit is implemented in the respective vehicle.
Chassis data. The vehicle gives the program a description of itself and how it is configured.
User functions. In order to meet service market requirements to work more effectively, there is an option to troubleshoot via user functions, e.g. cruise control.
Use of the program requires a PC, a USB key and a VCI3. These components must comply with the applicable system requirements, so that the program will operate correctly.


SCANIA DEVELOPER Software (XCOM-SOPS-Scania SDP3-BNS II)
 
Buy it for 5 reasons:
1. Read ECU ID, data, parameters, fingerprint.
2. Read and erase DTC.
3. Spare Part program all systems.
4. Gather all data for field-test functions.
5. Load, modify, compare SOPS files.
 
Supported modification of ECU data of the following types:
• EMS – Engine management system.
• GMS – Gearbox management system.
• RET – Retarder system.
• AWD – All wheel drive system.
• CLS – Clutch Control.
• EEC – Exhaust Emission Control.
• COO (COO7) – Coordinator.
• BWS (BCI1) – Bodywork system.
 
Supported resolving trouble codes to text description for the following types:
• EMS (S6, S7, S8).
• GMS (OPC4, OPC5).
• RET (RET1, RET2).
• AWD (AWD1).
• EEC (SCR1, EEC3).
• COO (COO6, COO7).
• HMS (HMS1).
 
Some interesting options with XCOM:
• AdBlue ON/OFF.
• EGR ON/OFF.
• Chassis ID/VIN Change.
• Immobilizer ON/OFF.
• Truck Power INCREASE.
• ECU Recovery.
• ECU Reset.
• ECU Unlock without PIN.
 
Support Languages: English, German, Spanish, French, Japanese, Dutch, Polish, Portuguese, Swedish, Norwegian, Suomi, Turkish, Italian, Czech, Russian.

This is ready to use. It is installed on to a Windows 10 genuine laptop, and all Scania software version 2.5.x 2022 + XCOM 2.30 is installed and ready to use with all of the cables provided. 

Laptop Details

You can choose between 3 laptops when making your purchase. All laptops are GRADE A refurbished with a 12 month warranty. 

Dell Latitude - We use dell E series laptops with SSD hard drives and at least core i5 CPU's so that they are reliable and fast. 

Panasonic CF-53 - We use at least mark 2 CF-53's with SSD hard drives and at least core i5 CPU's so that they are reliable and fast. 

Panasonic CF-19 - We use at least mark 6 CF-19's with SSD hard drives and at least core i5 CPU's so that they are reliable and fast. 

If you require a specific specification, do not hesitate to contact us. 

What's included

  • Laptop
  • Scania VCI3
  • Latest software installed ready to use.

 
This system is pre-built, the software is pre-configured and installed, and the system is ready to use upon receipt! Simply start working straight away!